Software Upload - 3Com OfficeConnect 3CR100A97 User Manual

Software Upload

1 From your web browser, access the OfficeConnect Gateway page
(Default IP address: 192.168.1.1).
The Configuration options are displayed on the left-hand frame of the
OfficeConnect Gateway page.
2 Click Restore Factory Defaults (located in the Management section of the
left-hand frame) to access the Restore Factory Defaults page.
3 Select Restore Defaults to restore all settings to their original factory
default values.
You can use your web browser to upgrade the operational software
currently installed in the in the OfficeConnect Gateway base units and/or
Voice Expansion unit.
To perform an upgrade, you will need access to an FTP (File Transfer
Protocol) Server on your local network where you can store and retrieve
files. The Office Connect Gateway is configured by default as an FTP
Client.
CAUTION: This is an advanced feature of the OfficeConnect Gateway. Do
not perform an upgrade unless directed to do so by your Service Provider
(SP).
To upgrade the operational software installed on your OfficeConnect
Gateway base unit and/or Voice Expansion unit, perform the following
steps:
1 From your web browser, access the OfficeConnect Gateway page
(Default IP address: 192.168.1.1).
Software Upload 9 - 9