To Delete A Vpn Configuration; Vpn Route Configuration - 3Com OfficeConnect 3CR100A97 User Manual

To Delete a
VPN Configuration
VPN Route
Configuration
To delete a VPN Configuration, perform the following steps:
1 Select Delete from the Edit Mode drop-down menu.
2 Select the name of the VPN Tunnel you want to delete from the VPN
Name drop-down menu.
3 Click the Delete button and click OK when the system prompts you to
verify that you want to delete the VPN Tunnel.
4 Click Apply and then click SaveAll on the OfficeConnect Gateway menu
bar to permanently save your changes.
The VPN Route Configuration page lets you create, modify, and delete
routes for your configured VPN Tunnels. The information on this page is
organized into two sections. The upper section, VPN Tunnels, lists the
currently configured VPN Tunnels. You will use this section to select the
VPN Tunnel you want to create, modify, or delete a VPN route for. The
lower section, VPN Routes, lists the required parameters for configuring a
VPN route. You will use this section to create, modify or delete a VPN
route for the VPN Tunnel you selected.
If you have not configured a VPN Tunnel, you will not be able to
configure a route for it. If you access this page and no configured VPN
Tunnels exist, the system will prompt you to configure a VPN Tunnel and
provide a link to the VPN Tunnel Configuration page.
To access the VPN Route Configuration page, perform the following
steps:
1 From your web browser, access the OfficeConnect Gateway page
(Default IP address: 192.168.1.1).
The Configuration options are displayed on the left-hand frame of the
OfficeConnect Gateway page.

VPN Route Configuration 8 - 31