Table of Contents
Advertisement
Reboot System
3 Click Connect to access the Telnet window.
4 Login to the Telnet Session by entering your User Name and Password.
When you have entered this information, you can access the OCG-ADSL
Command Line prompt (
If your Service Provider has provided you with access to the CLI, refer to
the OfficeConnect Gateway CLI Guide for more information on how to
use the CLI. (Normally, this document is only provided to Service
Providers.)
To reboot your OfficeConnect Gateway Base unit, perform the following
steps:
CAUTION: You will not have access to the Web Configuration Interface
of the OfficeConnect Gateway while the system reboots.
1 From your web browser, access the OfficeConnect Gateway page
(Default IP address: 192.168.1.1).
The Configuration options are displayed on the left-hand frame of the
OfficeConnect Gateway page.
2 Click Reboot System (located in the Management section of the left-hand
frame) to access the Reboot System page.
).
OCG-ADSL>>
Reboot System
9 - 7
Advertisement
Table of Contents
Need help?
Do you have a question about the OfficeConnect 3CR100A97 and is the answer not in the manual?
Questions and answers