Figure 55
TDM Bus Settings Screen
Usually the 'PCM Law Select' parameter is set to A-law for E1 trunks and to
for T1 trunks.
See
V7122 Clock Settings
Bus Enable Fallback' and 'TDM Bus PSTN Auto Clock' parameters.
Restoring and Backing up the Gateway Configuration
The Configuration File screen enables you to restore (load a new ini file to the gateway) or to
back up (make a copy of the VoIP gateway ini file and store it in a directory on your
computer) the current configuration the gateway is using.
Back up your configuration if you want to protect your VoIP gateway programming. The
backup ini file includes only those parameters that were modified and contain other than
default values.
Restore your configuration if the VoIP gateway has been replaced or has lost its
programming information, you can restore the VoIP gateway configuration from a previous
backup or from a newly created ini file. To restore the VoIP gateway configuration from a
previous backup you must have a backup of the VoIP gateway information stored on your
computer.
To restore or back up the ini file:
Open the 'Configuration File' screen (Advanced Configuration menu > Configuration
File); the 'Configuration File' screen is displayed.
122
for information on configuring the 'TDM Bus Clock Source', 'TDM
μ
-law
V6100 and V7122 User Guide