For Windows 2000 Users - 3Com OfficeConnect 3CR100A97 User Manual

2 - 4 C 2: G
HAPTER ETTING
S I A S IP E
TARTED N TATIC
OfficeConnect Gateway web page, click LAN Configuration (located in
the Network section of the left-hand frame) to access the LAN
Configuration page.
12 In the LAN IP Address field, enter your workstation's original Gateway IP
address that you recorded earlier.
13 Click Apply.
14 Click SaveAll on the upper right portion of the menu bar to permanently
save your changes.
15 Quit your web browser.
16 Reset your workstation back to the original network settings you
recorded earlier.
17 Restart your workstation.
This completes the setup procedure for using a statically configured
workstation with the OfficeConnect Gateway.

For Windows 2000 Users

1 From the Start menu, select Settings and then Control Panel.
2 Double-click Network and Dial-up Connections.
3 Double click Local Area Connection.
The Local Area Connection Status window opens.
NVIRONMENT