Table of Contents
Advertisement
Probing
Probing System Description
Probing System Description
The analyzer probing system consists of shielded cables connected to the
analyzer card on one end, and a pod housing on the other. From the pod
housing, connection to the target system is through 12-inch coaxial cables
connected to the assorted probing accessories at the signal end. The pod
housing contains termination networks and comparators that drive open
collector outputs through the main cables. In addition, located on the pod
housing is an equivalent circuit illustration showing pod loading and channel
indicators for the 4 GHz operation. All probe accessories connect to 0.1 inch
centers.
Cable
Lead
Analyzer Probing System
2–4
Advertisement
Table of Contents
