Removing Memory Modules - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Main memory
▶ Eject the memory module again by pressing out the securing clips at each
end of the memory slot.
▶ Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
▶ Check if all securing clips are in the correct position, see
Concluding steps
▶ Install the system fan module, see
page 85.
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Resuming BitLocker functionality" on page
10.4

Removing memory modules

Upgrade and Repair Unit
(URU)
Tools: tool-less
CAUTION
▶
Use only released configurations to ensure a faultless operation of
the system.
▶
Before changing the memory configuration, verify if the
configuration is released. Please contact your sales outlet or our
customer service center.
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
336
"Installing the system fan module" on
66.
79.
81.
47.
Upgrade and Maintenance Manual
Figure
121.
Hardware: 5 minutes
99.
214.
TX1330 M4