Integrating The Converter Into The Project - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Commissioning

5.4 Quick commissioning

3. In the menu, select the following command:

4. Specify a name of your choice for the project.

You have created a new project.

Integrating the converter into the project

1. Switch on the converter power supply.

2. First insert a USB cable into your PC and then into the converter.

3. The PC operating system installs the USB driver when you are connecting the converter and

PC together for the first time.

4. Click on the

5. When the USB interface is appropriately set, then the screen form shows the devices that

can be accessed.

button in the toolbar to open the window of accessible devices.

Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B

SINAMICS G115D distributed drive