Conveyor, Two Directions And Two Speeds (P3393 = 4) - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Advanced commissioning

6.8 Conveyor technology control functions

You can commission the conveyor technology functions via the Startdrive PC tool.

Conveyor, two directions and two speeds (p3393 = 4)

With p3393 (conveyor technology application) set to 4, the converter enables the load on a

conveyor belt to move in either positive or negative direction with variable speeds. Four

sensors are required to signal the limit positions for the motor to stop or decelerate.

Conveyor technology control parameters (Page 175)

Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B

SINAMICS G115D distributed drive