Use For The Intended Purpose - Siemens SINAMICS G115D Operating Instructions Manual

America
Telephone: +1 800 333 7421
support.america.automation@siemens.com
Asia / Australia / Pacific
Telephone: +86 400 810 4288
support.asia.automation@siemens.com
Valid operating instructions for SIMOGEAR
• BA 2030 - operating instructions for SIMOGEAR gearboxes
• BA 2031 - operating instructions for permissible mounting position deviations of
SIMOGEAR gearboxes
• BA 2330 - operating instructions for LA/LE/LES motors for mounting on SIMOGEAR
gearboxes
• BA 2535 - operating instructions for SIMOGEAR gearboxes for monorail conveyors
• BA 2730 - Operating Instructions for SIMOGEAR geared motors with encoder for safety-
relevant applications
See also
Once Delivered (https://c0p.siemens.com:8443/sie/1nce_delivered)
11.3.2

Use for the intended purpose

The SIMOGEAR gearboxes described in these operating instructions have been designed for
stationary use in general engineering applications.
Unless otherwise agreed, the gearboxes have been designed for use in plants and equipment
in industrial environments.
The gearboxes have been built using state-of-the-art technology and are shipped in an
operationally reliable condition. Changes made by users could affect this operational
reliability and are not permissible.
Note
The data on the rating plate assumes an installation altitude of up to 1 000 m above sea level.
The permissible ambient temperature is stamped on the rating plate.
For different installation altitudes and ambient temperatures, contact Technical Support.
The gearboxes have been designed solely for the application described in the Technical data
(Page 365). Do not operate the gearbox outside the specified power limit. Other operating
conditions must be contractually agreed.
Do not climb on the gearbox. Do not place any objects on the gearbox.
SINAMICS G115D distributed drive
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
Additional information on the SIMOGEAR geared motor
11.3 Specific data gearbox
405