Table of Contents
Advertisement
2.
Change the set value with the [PUSH SET] knob.
MAINTENANCE MENU
OUTPUT LEVEL CH1 ADJUST
80
(HEX)
PRESET : 80
INC/DEC : CTRL.KNOB
TO MENU :
MENU KEY
4-3-4.
BATTERY (A2E)
This menu is used for calibration so that the voltage supplied from the DC 12 V connector and the battery voltage can
be detected correctly.
(For details, refer to
"8-6. DC IN +12 V
Menu hierarchy
[M1 : ADJUST]
[A2 : AUDIO/VIDEO/BATTERY]
[A2E : BATTERY]
[DC-IN +12V]
Procedure
1.
Select "DC-IN +12V."
2.
Press the [PUSH SET] button.
Automatic adjustment is performed and "COMPLETE" is displayed.
MAINTENANCE MENU
DC-IN +12V
USE DC IN POWER.
AND SUPPLY CORRECT
+12.0 VOLTAGE.
OK & ADJUST :
SET KEY
TO MENU : MENU KEY
4-3-5.
NV-RAM CONTROL (A2F)
This menu is used for the saving the various adjustment data.
(For details, refer to
"8. Electrical
Menu hierarchy
[M1 : ADJUST]
[A2 : AUDIO/VIDEO/BATTERY]
[A2F : NV-RAM CONTROL]
Procedure
1.
Select NV-RAM CONTROL.
2.
Select SAVE ALL ADJUST DATA or ALL DATA PREVIOUS with the [PUSH SET] knob.
Note
SAVE ALL ADJUST DATA: Saves adjustment data.
ALL DATA PREVIOUS: Restores pre-adjustment data
PDW-HD1550
Adjustment")
Adjustment")
4-9
Advertisement
Table of Contents
