Table of Contents
Advertisement
4-5-9.
ANALOG I/O (M374)
Sets whether to output analog audio signals from the AUDIO OUTPUT 1 and AUDIO OUTPUT 2 connectors or input
analog audio signals from the ANALOG AUDIO INPUT 3 and ANALOG AUDIO INPUT 4 connectors.
2ch IN/OUT [2ch]: Sets the AUDIO OUTPUT 1 and AUDIO OUTPUT 2 connectors.
4ch INPUT [4ch]: Sets the AUDIO OUTPUT 3 and AUDIO OUTPUT 4 connectors.
Menu hierarchy
[M3 : OTHERS]
[M37 : AUDIO CONFIG]
[M374 : ANALOG I/O]
Procedure
1.
Select ANALOG I/O.
2.
Modify set values with the [PUSH SET] knob.
3.
Press the [F5 (SAVE)] button to save the settings.
4.
Turn off/on the power of the unit.
4-5-10.
OUT LEVEL (M377)
This menu is used to set the reference level when outputting analog audio signals from the ANALOG AUDIO OUTPUT
1 and ANALOG AUDIO OUTPUT 2 connectors.
+4dB, 0dB, -3dB, -6dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i/50P/25P.
Menu hierarchy
[M3 : OTHERS]
[M37 : AUDIO CONFIG]
[M377 : OUT LEVEL]
Procedure
1.
Select OUT LEVEL.
2.
Modify set values with the [PUSH SET] knob.
3.
Press the [F5(SAVE)] button to save the settings.
MAINTENANCE MENU
M3:OTHERS
M37:AUDIO CONFIG
M377:OUT LEVEL: +4dB
*
+4dB
0dB
-3dB
-6dB
4-5-11.
VITC REC (M391)
This menu is used to select whether to record the VITC in the input HDSDI signals in the LTC user bits area.
DISABLE [dis]: It is not recorded.
ENABLE [ena]: It is recorded.
Menu hierarchy
[M3 : OTHERS]
[M39 : OTHER CONFIG]
[M391 : VITC REC]
PDW-HD1550
4-17
Advertisement
Table of Contents
