Table of Contents
Advertisement
Menu hierarchy
[M6: DRIVE]
[D0: DRIVE MAINTENANCE]
[OTHERS]
[VERSION]
Procedure
1.
Select the "VERSION."
A confirmation window appears.
VERSION
PCKG: 1.00
FPGA: 1.00
BRG : 1.00
DRV : 1.00
EXIT: MENU KEY
4-8-19.
SERIAL NO
This menu is used to display the serial number of the optical drive.
Menu hierarchy
[M6: DRIVE]
[D0: DRIVE MAINTENANCE]
[OTHERS]
[SERIAL NO]
Procedure
1.
Select the "SERIAL NO."
A confirmation window appears.
SERIAL NO
ID: XDS-PD2000
NO: 0010001
EXIT: MENU KEY
4-8-20.
UPLOAD TO EEPROM
This menu is used to update the backed-up EEPROM data when SE-1004 completed board (EEPROM (IC3): not replace)
is replaced or only the EEPROM (IC3) on the SE-1004 board is replaced.
Note
• When replacing the SE-1004 board, remove the EEPROM (IC3) from the old board and mount it on the new board
without executing this menu. Execute this menu only when the EEPROM (IC3) is independently replaced.
PDW-HD1550
4-56
Advertisement
Table of Contents
