6-7-10.
BD-42 Board, SY-400 Board
Preparation
1.
Remove the top plate assembly. (Refer to
2.
Remove the optical drive assembly. (Refer to
3.
Remove the IF-1240 board. (Refer to
4.
Remove the optical drive (XDD-P210). (Refer to
Procedure
1.
Remove the seven screws (M2 x 2.7) to detach the shield case sub assembly.
Special head (M2 x 2.7)
Special head (M2 x 2.7)
2.
Disconnect the SY-400 board from the connector (CN700) on the BD-42 board.
PDW-HD1550
"6-3. Top Plate
Assembly")
"6-7-1. Optical Drive
"6-7-3. IF-1240
Board")
"6-7-4. Optical Drive
Shield case sub assembly
Assembly")
(XDD-P210)")
Special head (M2 x 2.7)
6-31