Table of Contents
Advertisement
4-7-3.
SUBNET MASK (M52)
This menu is used to set the subnet mask.
Menu hierarchy
[M5 : NETWORK]
[M52 : SUBNET MASK]
Note
• Subnet mask cannot be set when DHCP is set to "ENABLE".
• To check the subnet mask acquired automatically, close the maintenance menu and then open it again.
Procedure
1.
Select SUBNET MASK.
2.
Modify set values with the [PUSH SET] knob.
Tip
Use the right arrow button and the left arrow button to move to the next input field.
3.
Press the [F5(SAVE)] button to save the settings.
MAINTENANCE MENU
SUBNET MASK PRESET
255.255.255.000
DHCP : disable
SHIFT : (<)(>)KEY
INC/DEC : CTRL.KNOB
CLEAR : RESET KEY
DATA SAVE :
SAVE KEY
TO MENU :
MENU KEY
4-7-4.
DEFAULT GATEWAY (M53)
This menu is used to set the address of the default gateway.
Note
• The address of the default gateway cannot be set when DHCP is set to "ENABLE".
• To check the address of the default gateway acquired automatically, close the maintenance menu and then open it
again.
Menu hierarchy
[M5 : NETWORK]
[M53 : DEFAULT GATEWAY]
Procedure
1.
Select DEFAULT GATEWAY.
2.
Modify set values with the [PUSH SET] knob.
Tip
Use the right arrow button and the left arrow button to move to the next input field.
3.
Press the [F5(SAVE)] button to save the settings.
MAINTENANCE MENU
DEFAULT GATEWAY PRESET
000.000.000.000
DHCP : disable
SHIFT : (<)(>)KEY
INC/DEC : CTRL.KNOB
CLEAR : RESET KEY
DATA SAVE :
SAVE KEY
TO MENU :
MENU KEY
PDW-HD1550
4-30
Advertisement
Table of Contents
