Table of Contents
Advertisement
6-13-3.
DIO-100 Board
Preparation
1.
Remove the control panel assembly. (Refer to
2.
Remove the top plate assembly. (Refer to
3.
Remove the bottom plate assembly. (Refer to
4.
Remove the HPR board assembly. (Refer to
Procedure
1.
Remove the two screws and disconnect the DIO-100 board from the connector (CN2700) on the HPR-55 board.
2.
Install the removed parts by reversing the steps of removal.
PDW-HD1550
"6-2-1. Control
Panel")
"6-3. Top Plate
Assembly")
"6-4. Bottom Plate
Assembly")
"6-13-1. HPR Board
Assembly")
PSW2.6 x 6
CN2700
(HPR-55 board)
DIO-100 board
6-57
Advertisement
Table of Contents
