After A Memory Card Is Inserted - Sony PDW-HD1550 Service Manual

LOG Alarm message in
status display area
W54-000 ILL. Disc!
W54-001 ILL. Disc!
W54-002 ILL. Disc!
W54-003 ILL. Disc!
W60-013 No FS!
W60-017 FORMAT NG!
W6F-E00 DRV ADJ err
W6F-E03 DRV ADJ err
W6F-E80 DRV ADJ err
W6F-E83 DRV ADJ err
2-3-3.

After a Memory Card is Inserted

LOG Alarm message in
status display area
W40-021 Over DUR! (A)
W40-060 Unknown Media (A)
W40-062 Memory (A) needs Re-
storing.
W40-067 Memory (A) Error!
PDW-HD1550
Alarm message in video
monitor screen
IRREGULAR DISC IS USED.
PLEASE EJECT DISC.
IRREGULAR DISC IS USED.
PLEASE EJECT DISC.
IRREGULAR DISC IS USED.
PLEASE EJECT DISC.
IRREGULAR DISC IS USED.
PLEASE EJECT DISC.
NO FILE SYSTEM.
PLEASE EJECT DISC.
AUTO FORMATTING WAS
NOT COMPLETED.
CANNOT PERFORM AUTO
DRIVE ADJUSTMENT.
CANNOT PERFORM AUTO
DRIVE ADJUSTMENT.
CANNOT PERFORM AUTO
DRIVE ADJUSTMENT.
CANNOT PERFORM AUTO
DRIVE ADJUSTMENT.
Alarm message in video
monitor screen
EXCESSIVE DURATION IS
IN MEDIA (A).
UNKNOWN MEDIA (A).
PLEASE CHANGE.
MEDIA ERROR.
MEDIA (A) NEEDS TO BE RE-
STORED.
MEDIA(A) CANNOT BE RE-
STORED.
PLEASE RESTORE IT USING
THE RECORDED EQUIP-
MENT.
Description/action
Unsupported REC MODE was detected in the R
media.
Unsupported PAC is used in the R media.
Unsupported SpareArea is used in the R media.
Unsupported DFL Entry was detected in the R me-
dia.
Eject the disc.
Failed in automatic formatting.
Note
Once eject the disc and then insert it again or insert
another disc.
Startup adjustment or OPC of ChA cannot be ter-
minated.
Note
Once eject the disc and then insert it again or insert
another disc.
Failed in startup adjustment of ChA.
Note
Once eject the disc and then insert it again or insert
another disc.
Startup adjustment or OPC of ChB cannot be ter-
minated.
Note
Once eject the disc and then insert it again or insert
another disc.
Failed in startup adjustment of ChB.
Note
Once eject the disc and then insert it again or insert
another disc.
Description/action
There is a clip whose duration exceeds six hours
recorded on the memory card. (slot A).
The inserted memory card has been partitioned, or
it contains more clips than the maximum number
that can be handled by this unit.
Insert a memory card that has not been partitioned,
or one that contains fewer than the maximum num-
ber of clips.
A memory card must be restored because an error
has occurred in the card.
Perform a Update/Restore Memory of the Clip
Menu.
An error occurred in the memory card and it must
be repaired.
Restore the memory card using the equipment that
recorded the memory card.
Continued
2-11