Ldr-35 Board - Sony PDW-HD1550 Service Manual

6-7-13.

LDR-35 Board

Preparation
1. Remove the top plate assembly. (Refer
2. Remove the optical drive assembly. (Refer to
3. Remove the IF-1240 board. (Refer to
4. Remove the optical drive (XDD-P210). (Refer to
5. Remove the loader assembly. (Refer to
Procedure
1. Remove the spring of the release lever and rotate the release lever to the direction of the arrow.
2. Remove a screw (M2 x 2.7) to detach the LDR-35 board.
Note
When installing the LDR-35 board, fit the two bosses with the two holes in the LDR-35 board.
Special head
(M2 x 2.7)
LDR-35 board
Holes
3. Install the removed parts by reversing the steps of removal.
Note
After the work is completed, make skew adjustment. (Refer
PDW-HD1550
to"6-3. Top Plate Assembly")
"6-7-1. Optical Drive
"6-7-3. IF-1240 Board")
"6-7-4. Optical Drive
"6-7-5. Loader Assembly")
Boss
to"7-4. SKEW
Assembly")
(XDD-P210)")
Remove a spring.
Rotate the release lever.
Adjustment")
Boss
6-38