6-2-3.
Speaker
Preparation
1.
Remove the control panel assembly. (Refer to
2.
Remove the bottom case assembly. (Refer to
Procedure
1.
Remove the speaker assembly.
(1) Open the clamp to detach the harness.
(2) Remove the two screws to detach the speaker assembly.
Clamp
Harness
PSW2.6 x 6
2.
Remove the speaker from the speaker holder.
Speaker holder
3.
Install the removed parts by reversing the steps of removal.
PDW-HD1550
"6-2-1. Control
Panel")
"6-2-2. Bottom Case
Assembly")
Speaker assembly
Speaker
Harness
6-5