3.
Align the positioning projections of the cleaner retainer (4G) with the positioning slits of the lens cleaning base
(4G), and then install the cleaner retainer (4G).
4.
Press the cleaner retainer (4G) so that no gap is generated between the cleaner retainer (4G) and the lens cleaning
base (4G).
Note
This is important work to determine the distance between the lens and the lens cleaner. Carry out this work
accurately.
Positioning projection
Positioning slit
lens cleaning base (4G)
PDW-HD1550
Lens cleaners
Cleaner retainer (4G)
Positioning projection
Positioning slit
Cleaner retainer (4G)
5-8