6-2-4.
LCD/FP-209 Board
Preparation
1.
Remove the control panel assembly. (Refer to
2.
Remove the bottom case assembly. (Refer to
Procedure
1.
Remove the control panel sub assembly.
(1) Remove the jog dial and the shuttle ring.
(2) Remove the control panel sub assembly.
Jog dial
Shuttle ring
2.
Remove the LCD.
(1) Release the four claws and open the LCD in the direction of the arrow.
(2) Disconnect the two flexible boards from the two connectors (CN101, CN102) on the FP-209 board.
Claws
PDW-HD1550
"6-2-1. Control
Panel")
"6-2-2. Bottom Case
LCD
Assembly")
Control panel sub assembly
Claws
Flexible boards
CN101, CN102
(FP-209 board)
6-6