Table of Contents
Advertisement
Tip
For how to update the firmware, refer to
4-5-23.
LOG UPLOAD (M3E4)
This menu is used to copy the log of the operating conditions to the USB memory connected to the USB connector on
the front panel.
Menu hierarchy
[M3 : OTHERS]
[M3E : USB MEMORY UTIL]
[M3E4 : LOG UPLOAD]
Procedure
1.
Insert the USB memory into the USB connector on the front panel.
2.
Select LOG UPLOAD.
MAINTENANCE MENU
M3E4:LOG UPLOAD
UPLOAD OK?
CANCEL
: F1(RETURN)
EXECUTE : F5(SET)
3.
Press the [F5(SET)] button to start uploading the USB memory.
MAINTENANCE MENU
M3E4:LOG UPLOAD
NOW SAVING ...
4.
Upon completion of uploading, a message "COMPLETED" appears.
MAINTENANCE MENU
M3E4:LOG UPLOAD
COMPLETED
TO MENU : MENU KEY
4-5-24.
FACTORY SETUP (M3F)
HD-SDI AUDIO IN MUTING
This menu is used to set whether to mute the audio data if there is some problem in the embedded audio data of the HD-
SDI signal that is input to the unit.
AUTO: Audio data is muted and the audio input indicator blinks in the case of an error.
FORCED OFF: Audio data is not muted and the audio input indicator lights.
Menu hierarchy
[M3 : OTHERS]
[M3F : FACTORY SETUP]
[HD-SDI AUDIO IN MUTING]
PDW-HD1550
"1-12. Updating the
Firmware".
4-25
Advertisement
Table of Contents
