Error 20; Error 3X - Sony PDW-HD1550 Service Manual

Main Sub code Mainte-
code nance
logger
08 091 ○
095 ○
292 ○
992 ○
2-2-2.

Error 20

When a loader assembly error is detected, one of the following error codes is displayed.
Main Sub code Mainte-
code nance
logger
20 018 ○
111 ○
117 ○
118 ○
211 ○
213 ○
217 ○
218 ○
811 ○
818 ○
911 ○
918 ○
F10 ○
2-2-3.

Error 3X

When a sensor system error in the optical drive is detected, one of the following error codes is displayed.
Main Sub code Mainte-
code nance
logger
34 900 ○
909 ○
A00 ○
*1: Vertical movement of loading/unloading is also performed by executing STBY ON/OFF.
PDW-HD1550
Drive log- Description
ger
○ The spindle motor does not work (or there is no FG signal) after the
specified time period has passed.
○ The spindle motor cannot be stopped and continues to rotate (or the
FG signal is abnormal).
○ Spindle motor rotation was detected during vertical movement of
loading. *1
○ Spindle motor rotation was detected during unchucking.
Drive log- Description
ger
○ Abnormal current was detected in the loading motor.
○ Horizontal movement of loading did not end within the specified time
period.
○ Displacement of cartridge was detected in the loader during horizontal
movement of loading.
○ Abnormal current was detected in the loading motor during horizontal
movement of loading.
○ Vertical movement of loading did not end within the specified time pe-
riod.
○ Cartridge could not be detected even after loading.
○ Displacement of cartridge was detected in the loader during vertical
movement of loading
○ Abnormal current was detected in the loading motor during vertical
movement of loading.
○ Eject operation did not end within the specified time period.
○ Abnormal current was detected in the loading motor during eject oper-
ation.
○ Unchucking operation did not end within the specified time period.
○ Abnormal current was detected in the loading motor during unchucking
operation.
○ A loader alarm was detected during boot sequence.
Drive log- Description
ger
○ Ch-A detected error of the loader position sensor (LDR-36 board).
○ Ch-A detected error of the sensor hole (SE-1004 board, SE-1005 board).
○ Ch-B detected error of the loader position sensor (LDR-36 board).
Continued
2-4