7-3.
TRK/TLT DRV OFFSET Adjustment
Tip
The following describes the adjustment procedure for channel A (OP-0A). To perform adjustment for channel B (OP-0B),
select channel "OP-0B" in step 4 below.
Note
When performing this adjustment, place this unit horizontally. If adjustment is made with this unit placed improperly,
the adjustment may lead to an incorrect result.
Adjustment procedure
1.
Display the ADJUST window referring to
2.
Place the cursor at "TRK/TLT DRV OFFSET" with the [↑] and [↓] buttons.
3.
Press the [→] button.
DRIVE MAINTENANCE
ADJUST
LD IL ADJUST
TRK/TLT DRV OFFSET
SKEW
4.
A selection window opens. Select channel "OP-0A" with the [↑] and [↓] buttons and press the [→] button.
DRIVE MAINTENANCE
ADJUST
LD IL ADJUST
TRK/TLT DRV OFFSET
SKEW
SELECT OP
OP-0A
OP-0B
5.
A confirmation window appears waiting for entry of the [PUSH SET] knob.
TRK/TLT DRV OFFSET
OP-0A
ADJUST START?
OK:
SET KEY
EXIT: MENU KEY
PDW-HD1550
"7-1-3. Preparation for
Adjustment".
7-4