Table of Contents
Advertisement
3.
Press the [F5(SAVE)] button to save the settings.
MAINTENANCE MENU
M3:OTHERS
M39:OTHER CONFIG
M399:VERIFY USB : off
* off
on
4-5-14.
COPY TO USB (M39B)
This menu is used to set whether to copy to external storage or not.
disable [dis]: The copy is disabled.
enable [ena]: The copy is enabled.
Menu hierarchy
[M3 : OTHERS]
[M39 : OTHER CONFIG]
[M39B : COPY TO USB]
Procedure
1.
Select COPY TO USB.
2.
Modify set values with the [PUSH SET] knob.
3.
Press the [F5 (SAVE)] button to save the settings.
4-5-15.
VANC RX PACKET (M3B0)
This menu is used to set HDSDI VANC data input parameters.
Note
• In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the corresponding line in the second field (for
example, if line 9 is selected, line 572 is also selected for VANC packet reception).
• Menu item M3B0 enables recording of one VANC packet when the selected line contains any packets whose DID/
SDID matches the value set with this menu item.
• Up to four packets are recorded per each line regardless of the DID and SDID for the VANC set with menu item
M3B1 or M3B2.
• It is not possible to set the same line with menu items M3B0, M3B1, and M3B2. If the same line is specified,
priority is given in the order of M3B0, M3B1, and M3B2 (for example, if the same line is specified with M3B0
and M3B1, the setting with M3B1 is ignored).
• When VANC data is output to HD-SDI playback signals, the number of the output VANC line is the same as that
of the input VANC line.
• When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or essence mark output takes priority.
To disable UMID or essence mark output, set setup menu item 651 or 657 to "off".
Menu hierarchy
[M3 : OTHERS]
[M3B : VANC RX PARAMETER]
[M3B0 : VAVC RX PACKET]
CC
LINE
DID
SDID
PDW-HD1550
4-19
Advertisement
Table of Contents
