Sony PDW-HD1550 Service Manual page 64

LOG Alarm message in
status display area
W40-031 No Support!
W40-032 ILL. Index!
W40-040 REC INHI.!
W40-043 No Support!
W40-059 DISC frequency mis-
match!
W40-05A 1080/23.98P DISC
W40-064 XDROOT needs Re-
storing
W40-065 DISC Error!
W40-066 BPAV Error!
W50-010 BCA Read Error!
W50-011 BCA Read Error!
W51-020 DI Read Error!
W51-021 DI Read Error!
W51-500 ILL. Disc!
W52-00B Read err
W52-08B Read err
PDW-HD1550
Alarm message in video
monitor screen
FORMAT NOT SUPPORTED.
RECORDING AND PLAY-
BACK IS NOT POSSIBLE.
INDEX FILE ERROR.
PLEASE FORMAT DISC OR
EJECT.
AUTO FORMATTING WAS
NOT COMPLETED.
THE DISC WRITE PROTECT
TAB IS SET TO SAVE.
PLEASE EJECT DISC.
FORMAT NOT SUPPORTED
IN VFAM2.3 MODE.
DISC CANNOT BE RECOR-
DED.
RECORDING AND PLAY-
BACK IS NOT POSSIBLE.
SYSTEM SETTINGS DIFFER-
ENT FROM DISC.
DISC CANNOT BE RECOR-
DED.
SYSTEM SETTINGS DIFFER-
ENT FROM DISC.
DISC USERDATA XDROOT
NEEDS TO BE RESTORED.
DISC CANNOT BE RE-
STORED.
PLEASE RESTORE IT USING
THE RECORDED EQUIP-
MENT.
USERDATA BPAV ERROR.
CANNOT READ DISC BCA
AREA.
PLEASE EJECT DISC.
CANNOT READ DISC BCA
AREA.
PLEASE EJECT DISC.
CANNOT READ DISC IN-
FORMATION.
PLEASE EJECT DISC.
CANNOT READ DISC IN-
FORMATION.
PLEASE EJECT DISC.
IRREGULAR DISC IS USED.
PLEASE EJECT DISC.
CANNOT READ DISC DATA.
PLEASE EJECT DISC.
CANNOT READ DISC DATA.
PLEASE EJECT DISC.
Description/action
This appears when a disc recorded in an unsup-
ported recording format has been inserted.
Use a disc that is supported by this unit.
Format the disc or eject it.
Set the Write Inhibit tab on the disc so as to enable
recording.
The disc is recorded in a format that is not suppor-
ted by the VFAM2.3 mode.
Use a disc that is recorded in a format supported
by the VFAM2.3 mode.
This appears when the system frequency setting of
this unit and the system frequency of the inserted
disc do not coincide.
Replace the disc with one that is compatible with
the system frequency setting of this unit, or change
the system frequency setting of this unit.
This appears when the system frequency setting of
this unit and the system frequency of the inserted
disc do not coincide. Only pulldown playback is
possible.
Replace the disc with one that is compatible with
the system frequency setting of this unit, or change
the system frequency setting of this unit.
An error occurred in USERDATA XDROOT of the
disc, and USERDATA XDROOT must be restored.
Restore USERDATA XDROOT.
The inserted disc requires to be restored.
Eject the disc, and restore it or format it on another
XDCAM device.
You cannot use clips in the UserData > BPAV fold-
er.
Data in the BCA area cannot be read.
Once eject the disc and then insert it again or insert
another disc.
An error is present in the BCA area data.
Eject the disc and insert it again or insert another
disc.
Data in the PIC area cannot be read.
Eject the disc and insert it again or insert another
disc.
An error is present in the PIC area data.
Once eject the disc and then insert it again or insert
another disc.
An unsupported disc was inserted.
Once eject the disc and then insert it again or insert
another disc.
Failed to read addresses from the disc in ChA.
Once eject the disc and then insert it again or insert
another disc.
Failed to read addresses from the disc in ChB.
Eject the disc and insert it again or insert another
disc.
Continued
2-10