Sony PDW-HD1550 Service Manual page 25

Ref. No. Name
D2511 COME CB RESET
D2514 COME ATA_ACT
D2515 COME SUS_STAT
D2516 COME SUS_S3
D2600 Fan Alert
D2601 Rtc Alert
D2602 Tmp Alert
D2607 COME GBE0 LINK100
MEM-138 Board
D104
D103
D102
MEM-138 board (side A)
Ref. No. Name
D102 +3.3V
D103 ACTIVE
D104 LINK
PDW-HD1550
Color Description
Red Lights when the carrier board is reset
by COMe.
Blue Lights when the SATA IF built in
COMe is accessed.
Blue Lights when the SUS_STAT pin level
from COMe is low.
Blue Lights when the SUS_S3 pin level
from COMe is low.
Red Lights when the rotating speed of the
COMe fan decreases to the predeter-
mined speed.
Red Not assigned (lights by software set-
ting)
Red Lights when the board temperature
sensor detects the predetermined tem-
perature or higher.
Blue Lights when the link between COMe
and FP-CPU has been established.
Color Description
Blue Lights while +3.3 V power is turned
on.
Blue Lights when mSATA is accessed.
Blue Lights when mSATA link has been es-
tablished.
Normal state
Off
Blinks
Off
Off
Off
Off
Off
Lights
Normal state
Lights
Blinks
Lights
1-13