Getting Started; Preparing The Wireless Remote Commander; Replacing The Battery - Sony DVX-100S Operating Instructions Manual

Getting
Started
This section describes how to prepare
the wireless remote commander and
the unit.
10
Preparing the wireless
remote commander
The wireless remote commander already contains a
lithium battery (CR2025). Pull out the insulation film to
start using the unit.
To operate the system, point the commander at the
receptor window on the supplied remote control sensor.
Rear
Notes
• Do not leave the remote commander in an extremely hot or
humid place.
• Do not drop any foreign object into the remote commander,
particularly when replacing the battery.
• If you do not intend to use the remote commander for an
extended period of time, remove the battery to avoid possible
damage from battery leakage and corrosion.

Replacing the battery

Under normal conditions, battery will last approximately
1 year. (The service life may be shorter, depending on the
conditions of use.)
When the battery becomes weak, the range of the wireless
remote commander becomes shorter.
Replace the battery with a new CR2025 lithium battery.
Use of any other battery may present a risk of fire or
explosion.
Rear
+ side up