Transition from DOWN position to EJECT position
Procedure
1.
An item selection window appears.
LOADER
MOVE TO EJECT POS
MOVE TO STBY POS
IN SW:ON
POSITION:DOWN
REC INHI:NOT INHI
DOWN SENSOR:DOWN
SENSOR HOLE: 3 4
EXIT: MENU KEY
2.
Place the cursor at "MOVE TO EJECT POS" with the [↑] and [↓] buttons.
3.
Press the [→] button.
A confirmation window appears.
LOADER
MOVE TO EJECT POS
CHECK START?
OK:
SET KEY
EXIT: MENU KEY
4.
Press the [PUSH SET] knob.
The loader moves to the EJECT position and the cartridge is ejected.
LOADER
CHECKING...-->.
EXIT: MENU KEY
5.
The unit enters the cartridge insertion standby state.
LOADER
INSERT DISC
IN SW:OFF
POSITION:EJECT
REC INHI:INHI
DOWN SENSOR:NOT DOWN
SENSOR HOLE:
EXIT: MENU KEY
The following information is displayed for NG.
PDW-HD1550
4-38