Table of Contents
Advertisement
2.
Insert a cartridge.
The loader moves to the DOWN position.
LOADER
>
CHECKING... .
IN SW:ON
POSITION:EJECT
REC INHI:INHI
DOWN SENSOR:NOT DOWN
SENSOR HOLE:
EXIT: MENU KEY
The following information is displayed for NG.
LOADER
ERROR
IN SW:ON
POSITION:EJECT
REC INHI:INHI
DOWN SENSOR:NOT DOWN
SENSOR HOLE:
EXIT: MENU KEY
The following four procedures are described.
• Transition from DOWN position to EJECT position (Refer to
• Transition from DOWN position to STBY position (Refer to
• Transition from STBY position to EJECT position (Refer to
• Transition from STBY position to DOWN position (Refer to
Sensor hole
Indication of SENSOR HOLE in the menu window varies depending on the type of cartridge to be inserted.
• When a 23.3GB SL disc such as PFD23A is inserted, "SENSOR HOLE 2 3 4" is displayed.
• When a 50GB DL disc such as PFD50DLA is inserted, "SENSOR HOLE 3 4" is displayed.
• When a 128GB QL disc such as PFD128QLW is inserted, "SENSOR HOLE 4" is displayed.
If another message appears, the detection sensor may be out of order. Check the detection sensor.
Detection sensor 2
(S2: SE-1004 board)
Detection sensor 4
(S4: SE-1005 board)
PDW-HD1550
MOVE TO EJECT POS
MOVE TO STBY POS
IN SW:ON
POSITION:DOWN
REC INHI:NOT INHI
DOWN SENSOR:DOWN
SENSOR HOLE: 3 4
EXIT: MENU KEY
page 4-38
page 4-39
page 4-40
page 4-41
Detection sensor 3
(S3: SE-1005 board)
.)
.)
.)
.)
4-37
Advertisement
Table of Contents
