Alarms (Warning); At The Time Of Startup; When A Disc Is Inserted - Sony PDW-HD1550 Service Manual

2-3.

Alarms (Warning)

An alarm (warning message) appears in the status display area when an operation is attempted which is inappropriate
for the settings on this unit or the state of a media. Both the alarm message and the action to take to resolve the problem
appear on the video monitor screen (LCD of front panel) or HDMI signal outputted from HDMI OUT connector.
When an error occurs, its error code information is recorded in the error logger
main unit.
ALARM
HIGH TEMPERATURE.
Fig. 2-2. Example alarm in video monitor screen
2-3-1.

At the Time of Startup

LOG Alarm message in
status display area
W20-010 Exchg batt!
W30-010 ILL. SETUP!
W80-010 Update Err!
— Run Software Update
Program.
2-3-2.

When a Disc is Inserted

LOG Alarm message in
status display area
W40-010 Unknown FS!
W40-020 Over DUR!
W40-023 Over DUR!
W40-024 Over DUR!
PDW-HD1550
Alarm message in video
monitor screen
BATTERY NEEDS REPLAC-
ING.
PLEASE CONTACT SERV-
ICE.
INVALID SETTINGS SELEC-
TED IN SETUP MENU. SET
ITEMS IN THE SETUP MENU
TO THE APPROPRIATE VAL-
UES.
CONTACT SERVICE IF THIS
ALARM APPEARS AGAIN
AFTER ABOVE PROCE-
DURE.
RUN SOFTWARE UPDATE
PROGRAM.
RUN SOFTWARE UPDATE
PROGRAM.
Alarm message in video
monitor screen
UNKNOWN FILE SYSTEM.
PLEASE FORMAT DISC OR
EJECT.
EXCESSIVE DURATION IS
IN DISC.
EXCESSIVE DURATION IS
IN DISC.
EXCESSIVE DURATION IS
IN DISC.
("4-4-1. ERROR_LOG_(M20)") of the
Description/action
The lithium battery is exhausted.
This alarm message appears in the case of failure
in reading of menu set value or abnormal data.
Set the Setup menu again.
The software update is not properly performed.
Update the software version again.
The software update is not properly performed.
Update the software version again.
Description/action
Format the disc or eject it.
A clip longer than the specified time is recorded in
the disc.
A clip longer than the specified time is recorded in
the UserData > XDROOT folder.
A clip longer than the specified time is recorded in
the UserData > BPAV folder.
Continued
2-9