Table of Contents
Advertisement
SECTION 1
INSTALLATION
1-1, OPERATING CONDITIONS
1-2. SUPPLIED ACCESSORIES
Operating temperature : 5°C~40°C
(1) CDP-3100
Storage temperature
: -—20°C to 55°C
Power cord
1
Weight
: 6.5 kg (CDP-3100)
Player No. seal
74
700g (CDS-3100)
Maintenance manual part 1 : 1
Locations to avoid:
Operation manual
1
e Areas where the unit will be exposed
to direct sunlight or any other strong
(2) CDS-3100
lights.
Joint
|
e Dusty areas or areas where the unit
Screw (+B3 x 6)
:2
will be subject to vibration.
Connecting cable
71
e Areas
with
strong
electric
or
Piayer No. seal
4
magnetic fields.
Operation guide
1
e Areas near heat sources
e Areas where the unit will be subject
to vibration.
e Areas with a lot of electrical noises.
e Areas where static noises easily
occur.
1-3. OPTIONAL ACCESSORIES
Note for installation:
CDS-3100
: COMPACT DISC PLAYER CONTROL UNIT
The rear side must be at least 40 cm
DABK-3101 : MEMORY BOARD
leave at least 40 cm at the top for
servicing of the print board.
But this space need not be left if the
unit is mounted in a rack because
maintenance of the print board can
be carried out by pulling out the unit.
The unit has been designed to be
used upright.
Therefore do not place it on its side
nor tilt it.
CAUTION
Laser beam
When servicing, do not approach the laser exit with the eye
too closely. in case it is necessary to confirm laser beam
emission, be sure to observe from a distance of more than
30 cm from the surface of the objective lens on the optical
pick-up block.
Advertisement
Table of Contents
