Maintenance And Service; General Information; Installer Button - Bosch ICP-MAP5000-2 Installation Manual

MAP 5000
6

Maintenance and service

6.1

General information

Maintenance and inspection work must be carried out at defined intervals and by
corresponding expert personnel. The regulations of DIN VDE 0833 apply additionally for all
work of this kind.
Notice!
Have maintenance and inspection work carried out regularly by trained expert personnel.
Bosch Sicherheitssysteme GmbH recommends performing a functional and visual inspection
at least once annually.
Danger!
Danger of electric shock if live parts are touched. For your safety, you should switch off the
power supply to the security system when carrying out maintenance or installation work!
6.2

Installer button

Using the installer button
Element
1
2
3
Switching on the installer mode
4
P
Switching off the installer mode
4
System restart
The system can be restarted without being de-energized.
4
Bosch Sicherheitssysteme GmbH
Description
Installer button
Operating LED
Tamper switch
Press the installer button on the main panel for three seconds.
The operating LED starts blinking slowly to indicate the installer mode.
Press the installer button on the main panel for three seconds.
Press the installer button on the main panel for six seconds.
The LEDs on the main panel and all other installed modules stop indicating briefly.
Installation manual
Maintenance and service | en
2016.06 | 17 | F.01U.168.332
67