System Software Setup; Logging On To The System For The First Time; Configure Bosch Recording Station - Bosch BRS Quick Installation Manual

Bosch Recording Station Appliance
3

System Software Setup

3.1

Logging on to the System for the first time

When the system is started for the first time the Set Up Windows screen is displayed and the
language selection dialog box is displayed.
Proceed the following steps.
1.
2.
3.
4.
5.
6.
7.
8.
3.2

Configure Bosch Recording Station

To perform a basic configuration, proceed as follows:
1.
2.
3.
4.
5.
6.
Bosch Security Systems
Select the system language, then click Next >.
Select your regional settings, then click Next >.
Enter the administrator's user name, then click Next >.
Note:
We recommend using Admin as user name. Administrator or BRSuser cannot be used.
Enter the administrator's password and a password hint, then click Next >.
Accept the license agreement, then click Next >.
Select the time zone and the date and time, then click Next >.
The system restarts automatically in administrator mode. The Windows screen is
displayed.
You can now configure the network, computer name, IP cameras and the Bosch
Recording Station or you can load an existing Bosch Recording System configuration file.
Note:
To load an existing Bosch Recording Station configuration file, click Start, right-click
Bosch Recording Station, then click Run as administrator.
– To configure the Recording Station:
See Section 3.2 Configure Bosch Recording Station, page 21
– To load an existing configuration:
See Section 3.3 Loading an existing configuration, page 23
Log off as administrator.
When you log on for the second time, the system starts in BRSuser mode and displays
the following:
– You have not configured the system: The Configuration Wizard is displayed.
– You have configured the system: Bosch Recording Station starts automatically. Enter
the relevant user name and password. The user interface is displayed.
Click Start, then click Bosch Recording Station. The configuration wizard is displayed.
In the Bosch Recording Station – Configuration Wizard dialog box, click Next >.
In the License activation dialog box, click Recorder.
Select the desired license package from the License: list and click Activate.... The
Activate license dialog box is displayed.
Note:
An 8 camera license is activated on BRS Appliance by default. The license is not displayed
in the Activated packages: list. If you need more packages, you can activate them in this
dialog box.
Enter the activation key in the License activation key: box and click Activate.
Note:
If you do not yet have an activation key, refer to (Section 5 Activating a License Package).
Click Next >.
Quick Installation Guide
System Software Setup | en
XMD-0041-VV002 | V1 | 2011.10
21