Button; Page> Buttons; Gain Knob - Kemper Profiler Main Manual

Front Panel Controls Stage 54
Pressing Store in Browser Mode will offer you three different options via the soft buttons: "Replace" will overwrite the
currently selected Rig with the new version while keeping the original name, "Store as" will save the Rig under a new
name and won't delete the original Rig. "Rename" will allow you to change the name of the current Rig.
If you press the STORE button with a module or section in focus, you have the option to either save a preset of that
specific module or section, or to save the entire Rig. If you decide to store a preset, you will have the same options
to "Replace", "Store as", or "Rename".
Your preset can later be found and reloaded by turning the BROWSE knob, with a module or section in focus.

Button (17)

Press this Exit Button to return to the home screen.
<PAGE> Buttons (18)
If there is more than one page within a particular module or menu, you can use these buttons to switch between
them.

GAIN Knob (19)

The GAIN knob controls the amount of distortion and covers an extremely wide range from ultra-clean to totally
distorted. The Gain control allows for the same large range on all PROFILEs, even if the original amp has a more
limited gain range.