Audio Setup - Kemper Profiler Main Manual

Buttons" sub-page. Use the three soft knobs on this page to change the assignments according to your needs. The
option "Switch Up&Down" allows you to switch the functions of the Up/Down Buttons.

Audio Setup

This page includes the following parameters:

Rig Change Crossfade Time (Rig X-Fade Time)
Most digital audio devices create an unpleasant gap in the audio signal when a preset is changed. The PROFILER
instead performs a crossfade between the previous and current Rigs, producing a seamless and smooth transition.
This crossfade time can be adjusted in a wide range. It affects both Browse and Performance Mode.

FX Loop Level
"FX Loop Level" controls the outgoing signal level of the hardware effects loop for correct leveling of the external
device. This helps to prevent noise or distortion. It is a global parameter and affects
is not affected by "FX Loop Level".
Stereo. Loop Distortion
✓
Increases of SEND output
versa. Therefore, the level and effect loop mix of the output signal stay unaltered.
✓
The PROFILER Stage allows for two simultaneous effect loops. In this case, FX Loop Level affects both.
level are compensated for corresponding decreases of
System Settings 242
Loop Mono as well as Loop
RETURN INPUT level and vice