Trouble Shooting - Kemper Profiler Main Manual

Trouble Shooting

This chapter is intended to help recognize certain error states which can be corrected by the user. Any error states
not covered here should be referred to KEMPER Support. Generally, please keep the PROFILER operating system
up-to-date and create backups on a regular base. The current operating system release and latest public beta are
always available on: www.kemper-amps.com/downloads

PROFILER doesn't power on
In case the PROFILER does not start, and the LEDs and display stay inactive, please check your electricity supply
and cabling. If these are intact, it is possible that the internal safety switch protecting the PROFILER against
overcurrent has been activated. In this case: pull the power cable, wait about two minutes, reconnect the cable, and
try to activate the PROFILER by turning the
Stage).

PROFILER doesn't boot up completely
If the PROFILER has not been shut down properly, the result could be that the PROFILER isn't able to completely
restart. In order to rebuild the internal database, please push and hold the
chicken head knob. Hold the RIG button until the message "Initializing current Rig" appears. Your data and settings
are not impacted by this procedure.
chicken head knob (or pressing the
Trouble Shooting 306
On/Off Button of the PROFILER
RIG button while you switch on with the