Rig Settings 70
Panorama
This parameter allows you to move the signal within the stereo field. The "Panorama" parameter affects the
plus "Master..."
HEADPHONE output
Output Sources
of all other stereo outputs. Panorama can also be controlled
via MIDI.
Transpose
This is the same "digital capo" effect also available as
Transpose
effect type. Using it here in Rig Settings means you
don't have to tie up an effect module.
DLY+REV Routing
This continuous parameter determines the signal routing of the two modules DLY and REV. It is described in great
detail in the
Reverb
chapter.
Rig Volume
This is the individual volume of the Rig. Note that this parameter does not drive the sound into any power amp
distortion, so it will only change the volume of the sound, not the character. The setting is stored with the Rig. If you
want to modify the overall volume of your PROFILER, use
Master Volume
instead.