Lock Button; Edit Button - Kemper Profiler Main Manual

Front Panel Controls Stage 52

LOCK Button (14)

Use the lock function to prevent a section or a module from being changed when you switch Rigs. To lock or unlock
individual modules, press their respective buttons while holding the LOCK button. Essentially, you can think of a
locked module as being "global".
Locked modules and sections are indicated by a small lock icon on the home screen.
To get an overview of the lock status of all modules, press and hold LOCK - all locked modules will be lit, while those
that are unlocked will remain unlit.
✓
The lock function works independently between Performance Mode and Browser Mode. So, you could, for example,
lock your Input Section in Browser Mode while keeping it unlocked in Performance Mode (which happens to be the
default setting).

EDIT Button (15)

A short click on a module button will activate or deactivate the module.
The EDIT button opens the most recently edited module and brings its parameters into focus on the display. From
then onwards, a short click on any other module button will immediately open its respective menu. Once a menu is
open, subsequent clicks on the same module button will deactivate/reactivate the module. Press to return to the
home screen.
An alternative way to enter a module is to hold its button for a second, without having pressed EDIT first. In this
case, a long press of a module button will change the focus of the display, whereas a quick press will
deactivate/activate the respective module.
Holding the EDIT button opens an Undo/Redo screen on which you can undo the most recent edits, or all edits made
since the current Rig was loaded.