Additional Switches Required - Kemper Profiler Main Manual

the example Four Pedals:
page in System Settings.
✓
If "WahPedal >Volume" is selected, those two functions are mutually exclusive. As soon as a wah effect is active, the
Wah Pedal controls this wah effect, while volume stays flat. As soon as there is no wah effect in the current Rig, or
the wah effect is switched off, the Wah Pedal controls volume. All other pedal links allow you to control their effects
simultaneously. So, a Morph Pedal could morph and control wah, as well as pedal pitch effects at the same time, if
those links are selected. A Wah Pedal could control wah and pedal pitch effects together, if "WahPedal >Pitch" is
checked.
✓
A tutorial video demonstrating setting up of expression pedals can be found at:

Additional Switches Required?

Switches can be connected to both the PROFILER and the PROFILER Remote. Switching functions can be
assigned globally. These functions include Rig up/down, activating/deactivating effect modules, triggering
Freeze functions, engaging the
The PROFILER Remote and Stage have several built-in switches: Each of their
multiple switching functions that can be assigned and stored by Rig. In addition, the LOOPER, TAP, and
buttons can be reassigned to other switching functions, globally. If you still feel the need for even more switches, you
could connect single or dual switches to each of the
Luxury. Then select "WahPedal >Volume" and "WahPedal >Pitch" on the Pedal Links
Tuner Mode, tapping the
four PEDAL
Expression Pedals and Foot Switches 134
www.kemper-amps.com/video
tempo, or triggering Beat Scanner
four Effect Buttons
inputs.
Action &
temporarily.
can assume
TUNER