User Interface 2 - Kemper Profiler Main Manual

Rig Button Morph This option determines, if subsequent hits of the
Morphing or reload the current Rig/Slot in its stored state. This option is also applied if MIDI
control changes # 50-54 are received subsequently.
Signal LEDs Blue This option allows you to switch the color of the INPUT and OUTPUT LEDs from white to
blue.
LCD Color Here you can select the base color of the PROFILER display.
Auto Favorite Enable this option to ensure that each time you store a Rig it will assigned as a favorite
automatically and will therefore appear in
Volume LED The MASTER VOLUME knob of the PROFILER Stage offers a LED collar, which reflects the
Collar volume of one of the outputs. Select this output with Volume LED Collar.
specific to
PROFILER
Stage

User Interface 2

This page is only available on the PROFILER Stage.
The display of the Stage will always show information most relevant to the mode of operation. When you load Slots
in Performance Mode via Rig Buttons, you can choose between two display layouts: "A" or "B".
The option "Group of 5/Single Rig" determines whether the Up/Down Buttons step through the Rigs individually or by
groups of five in Browser Mode.
Looper Location and Looper Volume are explained in the paragraph entitled "Looper".
If you don't need the TAP, TUNER or LOOPER buttons to function as their default, you are free to assign other
switching functions, or to deactivate them altogether. The soft button "Button Assignment" opens the "Assignable
System Settings 241
Rig Buttons 1-5 of Remote or Stage initiate
View Favorites.