Midi Program Change Assignments And Settings; Date And Time - Kemper Profiler Main Manual

MIDI Program Change Assignments and Settings

On the next System Settings page, you can assign up to 128 MIDI program change numbers to Rigs in your browse
pool. Sending these program change numbers in Browser Mode from any MIDI controller will load the assigned Rigs.
To do so, first select the Rig you want to assign a program change number to and then press the
Navigate to "Browser Mode PrgChg" page using the right PAGE button, select a desired Program Change using the
soft knob labeled "MIDI PrgChg#" and then press the soft button labeled "Assign". Use the soft button labeled
"Unassign" to unassign a Rig. Assigned MIDI program changes are displayed on the home screen on the right-hand
side below the Rig Name.
On the following page "MIDI Settings" you find more options and parameters, which are explained in detail in the
MIDI chapter.
✓
Performance Mode offers powerful possibilities to logically organize Rigs for example by song, loading these via
PROFILER Remote or MIDI

Date and Time

On this page, you can set the date and time using the soft buttons "Edit Date" and "Edit Time". Make sure the correct
date and time is entered as this will help you to organize your Rigs and PROFILEs.

Clock > Remote
This option will appear, if a
time on the Remote.
and even simultaneously control external devices via MIDI.
PROFILER Remote is connected or on. Enabling it will activate the display of the current
System Settings 244
SYSTEM button.