Air Chorus - Kemper Profiler Main Manual


Amount
If the full sound becomes too complex, you have the option to continuously reduce the amount of delay lines. You
can smoothly fade the numbers of delay lines from one to three on each stereo side. So yes, even 1.5 choruses are
possible: this simply means one chorus is at full volume, the other is at half.

Crossover
Increase the value of the "Crossover" parameter to prevent the chorus effect from modulating the lower frequencies
of the input signal.

Air Chorus

The Air Chorus is a subtle kind of chorus, as it does not mix the direct sound with the processed signal; instead, it
modulates the pitch of the left and right sides of the signal independently from each other. The resulting chorus
sound happens in the air between the speakers, where both signals are added together - hence the name. This is
how the famous Jazz Chorus

Depth
In most circumstances, as with the Hyper Chorus, the "Depth" control will be the only control you need for achieving
the sound you want. Higher values will give you a noticeable but delicate chorus, whilst lower values will create a
subtle stereo-widening of the soundstage, but without the typical beating effect you often get with a chorus.
TM
amplifier works.
Chorus (Blue) 174