Chicken Head Knob; Input Button - Kemper PROFILER Main Manual

Chicken Head Knob (1)

Use the chicken head knob to switch the PROFILER on and off. You can select one of the following modes:
Tuner Mode Open the tuner to fine-tune your instrument. Please find details in the chapter
Tuner.
Browser Mode Here you can browse through your Rig pool stored in the PROFILER.
Performance Mode Here you can organize your sounds for live performances. A chapter of this manual is
dedicated to
PROFILER Mode This is the place to create your own PROFILEs. Details can be found in chapter
PROFILING an

INPUT Button (2)

Press this button to enter the Input Section. Here, you can set the input sensitivity and select the physical input for
your guitar signal. In Browser Mode, the Input Section is locked by default. This means that the settings will be
applied to every Rig, unless you decide to unlock it. If you do unlock this section, the input settings will be recalled
individually with each Rig. In
prepare and store their Performances with specific settings of the Input Section for particular songs and guitars. The
Noise Gate, with its dedicated knob, also belongs to the Input Section.
Performance Mode.
Amp.
Performance Mode, the Input Section is not locked by default, because most users
Front Panel Controls 22
Using the