Midi Global Channel; Midi Clock - Kemper Profiler Main Manual

MIDI 275
Without leaving this page you can use the RIG navigation cross to load other Rigs from your browse pool and
perform more assignments.
Received MIDI program changes are indicated by a small "#" icon and control changes by a small knob icon on the
home screens in both Browser and Performance Mode. If bi-directional MIDI communication is established, this is
reflected by a "two arrows" icon.
Instead of using MIDI program changes, you can use control changes (#48-54) to load Slots in Performance Mode
and Rigs in Browser Mode. Please refer to the tables in the previous paragraph.

MIDI Global Channel

By default, the PROFILER receives MIDI commands on all sixteen MIDI channels ("Omni"). However, if you want to
on the "MIDI Settings"
control multiple devices independently, you can set a specific channel in System Settings
page. Now, the PROFILER will only receive messages on that channel.

MIDI Clock

The PROFILER can both receive and send MIDI clock. Find details in the manual section about Tempo.