Midi; S/Pdif Input And Output; Speaker Output; Kensington® Lock Connector - Kemper Profiler Main Manual
Hide thumbs
Also See for Profiler:
- Main manual (246 pages) ,
- The basics & profiling manual (144 pages) ,
- Quick start manual (132 pages)
Table of Contents
Advertisement
Back Panel Overview Head, PowerHead, Rack, and PowerRack 43
MIDI (9)
Use these ports to connect the PROFILER to MIDI equipment. You can send MIDI program changes to the MIDI
INPUT to switch between Rigs, and MIDI control changes to switch and control effects. If you send
MIDI clock
to the
PROFILER, it will instantly sync its tempo, so that any tempo-dependent effects, like delay or tremolo, will adapt their
timing accordingly. Details about MIDI can be found in a dedicated chapter MIDI.
S/PDIF INPUT and OUTPUT (10)
This is a digital input and output that can be used to connect the PROFILER to other S/PDIF compatible devices,
such as certain computers and audio interfaces. Details related to connection and configuration can be found in the
chapter Reamping.
SPEAKER OUTPUT (11)
PROFILER PowerRack / PowerHead only. See chapter
Power Amplifier
for details.
Kensington® Lock Connector (12)
Here, you can connect a Kensington® lock to protect your PROFILER against theft.
Advertisement
Table of Contents
