Direct Control Knobs; Master Volume Knob - Kemper Profiler Main Manual

For metal sounds, we recommend adding one of the special noise gate effects, which are explained in the
Gate chapter.
With the chicken head knob
without influencing the resulting PROFILE.
✓
A tutorial video about the Input Noise Gate can be found on:

Direct Control Knobs (6)

Direct control knobs provide instant access to specific effects parameters. There are six on the PROFILER Head and
TM
PROFILER PowerHead
•
Modulation Rate and Modulation Intensity in the MOD module (Head / PowerHead only),
•
Delay Feedback and Delay Mix in the DLY module,
•
Reverb Time and Reverb Mix in the REV module.
The same parameters are also available in the respective effect menus.

MASTER VOLUME Knob (7)

Master Volume is the master of all output volumes and is always global. It is not stored as part of any Rig. Changing
the volume will not affect the color of the sound.
Volumes of all analog outputs including the
can be activated and deactivated with soft buttons in the
Front Panel Controls Head, PowerHead, Rack, and PowerRack 31
set to PROFILER Mode, the Noise Gate will also work with the connected amplifier, but
, and four on the PROFILER Rack and PROFILER PowerRack
HEADPHONE output
www.kemper-amps.com/video
are linked to Master Volume by default. These links
(e.g. "Headphone Link").
Output Section
Noise
TM
models: