Loading Performances; Foot Control - Kemper Profiler Main Manual

✓
As soon as you load another Slot from your foot controller, or foot buttons of the PROFILER Remote or Stage, any
former modifications within that Performance are interpreted as temporary tweaks during a live performance and will
be discarded immediately. If, for example, you had activated a booster in module B, or increased Delay Mix via
pedal, any such changes will be lost if you switch Slots remotely. This way, you can always be sure that Slots will be
loaded in their original, predictable state during live performances.
✓
However, there is an exception to this practice: While Rig Manager is connected, any modifications are interpreted
as editing and maintained during Slot changes as long as you stay within the same Performance.

Loading Performances

"Performance
The Load" parameter in System Settings determines what happens, as you step or scroll through
Performances via Remote, PROFILER Stage or MIDI. The default setting "Pending" means that the current Rigs stay
loaded and the PROFILER keeps waiting a few seconds for your Slot selection. "Slot 1" and "Keep Slot" load these
Slots automatically.

Foot Control

Obviously, our KEMPER
Performance Mode. However, if you prefer to keep things very simple a double switch can be connected directly and
used to step up and down through the Slots in a simple linear fashion. In addition, there are multiple methods
available to navigate via MIDI to accommodate various controller capabilities and requirements. For detailed
information please consult the chapter MIDI.
✓
Two tutorial videos explaining Performance Mode can be found at:
PROFILER Remote and PROFILER Stage are designed to get maximum benefits out of
Performance Mode 250
www.kemper-amps.com/video