Looper Button - Kemper Profiler Main Manual

different icons – one indicates an effect module that is only locked on the PROFILER, while the other indicates that
the Effect Button on the Remote is also locked.

LOOPER Button (6)

The Looper is a device for recording up to 60 seconds of stereo audio. It allows for an unlimited number of overdubs.
That means you can layer unlimited recordings on top of each other. The Looper functions are perfectly integrated
into the PROFILER Remote, as they rely heavily on its foot buttons and LEDs. You can use it:
•
just for fun, to play along with it,
•
to check your skills by listening to your own recording,
•
to evaluate and edit rigs, while the Looper plays guitar for you,
•
to let the Looper play guitar while you do the A/B comparison after PROFILING an amp.
The Looper is an entity that's totally independent of the rest of the PROFILER sound engine. Thus, you can change
Rigs and parameters to your liking, while the Looper continues its playback. The audio content of the Looper cannot
be stored to permanent memory; it will be lost when you power down the PROFILER. If you are familiar with other
looper devices, you'll find your way around it instantly. However, there are some powerful features available that go
beyond the standard looper functionality.
✓
A tutorial video explaining the Looper can be found at: www.kemper-amps.com/video
PROFILER Remote 257