Cabinet - Kemper Profiler Main Manual

Cabinet

The CABINET button brings the cabinet module into focus.
You can freely combine guitar cabinets and guitar amps from different PROFILEs to create new stacks. The cabinet
has four parameters to tweak its character in an artificial way:

High Shift, Low Shift
Both parameters influence the characteristic formants of a Cabinet PROFILE, thereby simulating a change in size.
"High Shift" will make the higher formants more prominent, whereas "Low Shift" does the same for the lower
frequencies.

Character
Use this parameter to change the overall character of the cab. Turning the soft knob to the right of center will enlarge
the peaks and notches in the frequency response curve. This will emphasize the character of the cabinet and may
sound too penetrating at extreme values. Turning it to left of center will smooth the differences between the peaks
and notches in the frequency response curve and flatten the character of the cabinet. Towards the leftmost position,
the sound will resemble that of analog cabinet simulations (which often have a very simple frequency response and
little character).

PURE CABINET
PURE CABINET™ is available in the cabinet module and in the Output Section. Please refer to the description of
PURE CABINET in the chapter Output Section.
Stack Section 149